Tasmota Brazil Smart Plug with Energy Monitoring
Tasmota Brazilian Type N Smart Plug, ESP8285 Wi-Fi Socket with HLW8032 Energy Metering, Built-in 16A Relay
Key Features
Tasmota firmware for flexible local smart-home control
Brazilian Type N plug design
Built-in ESP8285 Wi-Fi chip
Supports 2.4 GHz Wi-Fi networks
Integrated HLW8032 energy-metering chip
Measures voltage, current, active power, and accumulated energy consumption
Built-in high-quality 16A relay
Supports a maximum current of up to 16A
Compatible with MQTT, Home Assistant, and other supported automation platforms
Supports remote switching, timers, schedules, and automation rules
No mandatory third-party cloud service required
Product Description
Add smart control and real-time energy monitoring to your appliances with this Tasmota Brazilian Smart Plug.
Powered by an ESP8285 Wi-Fi chip, the plug runs Tasmota firmware and is designed for flexible local home automation. It can be integrated with MQTT, Home Assistant, and other compatible platforms, allowing you to control connected appliances, create schedules, and build customized automation rules.
The integrated HLW8032 energy-metering chip monitors voltage, current, active power, and accumulated energy consumption. This makes it easy to track appliance operation and understand electricity usage.
A built-in high-quality 16A relay provides reliable switching performance. The device supports a maximum current of up to 16A when used with a compatible electrical system, socket, and load.
Technical Specifications
| Item | Details |
|---|---|
| Product Type | Wi-Fi Smart Plug |
| Plug Standard | Brazilian Type N |
| Wi-Fi Chip | ESP8285 (2MB Flash) |
| Wireless Network | 2.4 GHz Wi-Fi |
| Firmware | Tasmota |
| Energy-Metering Chip | HLW8032 |
| Measured Parameters | Voltage, current, active power, and accumulated energy |
| Relay Rating | 16A |
| Maximum Supported Current | Up to 16A |
| Smart-Home Integration | MQTT, Home Assistant, and compatible local automation systems |
| Control Functions | On/off control, timers, schedules, and automation rules |
Suitable Applications
Household appliance control
Energy-consumption monitoring
Lighting and fan control
Chargers and power adapters
Office equipment
Scheduled appliance operation
MQTT automation projects
Home Assistant integration
DIY Tasmota smart-home systems
Package Includes
1 x Tasmota Brazilian Type N Smart Plug
Important Notes
This product uses a Brazilian Type N plug design. Please check the plug, socket, voltage, and frequency compatibility before ordering.
Do not exceed the product's maximum rated current of 16A.
Brazilian Type N plugs and sockets are available in different current ratings. Ensure that your wall socket and electrical installation are suitable for the intended load.
The connected appliance's power must remain within the limits of the smart plug, wall socket, and local electrical system.
Tasmota, MQTT, and Home Assistant configuration may require basic technical knowledge.
Energy-monitoring readings may vary slightly depending on the load and operating conditions.
Always follow local electrical and safety regulations.
Template:
{"NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18}
GPIOs:
GPIO3: CSE7766 Rx
GPIO5: Button1
GPIO12 :Relay1
GPIO13 :LedLinki
Notice:
HLW8032 occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.
