Upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
 
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
 
Lates Tasmota  full version pre flashed
Fully compatible with official Tasmota OTA server
Consumptiom monitoring
 
Specification:
 
Input voltage：100-240VAC 50/60Hz
Current：16A(Max)
Power rating：3840W
Wireless standard：IEEE802.11b/g/n,2.4GHz
Housing Color：Whtie
Operation Temperature：-20℃～+50℃
Plastic material:ABS+PC
Fire-protection rating:94-V0
 
Template:
 
{"NAME":"Athom Power Monitoring Plug","GPIO":[0,0,0,32,2720,2656,0,0,2624,544,224,0,0,1],"FLAG":0,"BASE":18}
 
GPIOs:
 
GPIO#
Component
GPIO0
None
GPIO1
None
GPIO2
None
GPIO3
Button1
GPIO4
BL0937 CF
GPIO5
HLWBL CF1
GPIO9
None
GPIO10
None
GPIO12
HLWBL SELi
GPIO13
LedLink
GPIO14
Relay1
GPIO15
None
GPIO16
None
FLAG
None
 
Notice:
HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.