Have the 15W RGBCCT bulks had any improvements? I've bought a number over the years, but they end up keep dying randomly and needing to be replaced. I'm NOT running them normally at full brightness either, and usually just with a warmer/neutral white, rarely color.
Are their any Led Light bulbs that i can connect to IoTorero. I was just wondering if i would be able to buy light bulbs that i can put in my ceiling and if i could control them with the same software as my Led strips.
Is there a way to configure the LS5050 to 3 (2-wire) white strips rather than 1 (4-wire) RGB? Either using the tasmota or esp version? I have both in hand?
I will tie this all in and use with Home Assistant.
Can I change my athom ls-5p from WLED to ESP?
If so, please advise how.
I am using Home Assistant, if that is at all a factor.
Thank you!
For esp i used the following code:
substitutions:
name: athom-rgb-light-8af425
friendly_name: ESPRGB001
ota:
- platform: esphome
esphome:
name: ${name}
name_add_mac_suffix: false
friendly_name: ${friendly_name}
api:
encryption:
key: *********************************************
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
#my stuffs
esp8266:
board: esp8285
restore_from_flash: true
web_server:
port: 80
output:
- platform: esp8266_pwm
id: red_output
pin: GPIO12
- platform: esp8266_pwm
id: green_output
pin: GPIO4
- platform: esp8266_pwm
id: blue_output
pin: GPIO14
light:
- platform: monochromatic
name: "Light 01"
output: green_output
- platform: monochromatic
name: "Light 02"
output: red_output
- platform: monochromatic
name: "Light 03"
output: blue_output