top of page

Tasmota UK Plug

 

Upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,

 

The measurement error of active power about 0.2%

The measurement error of effective current is 0.5%

The measurement error of effective voltage is 0.5%

 

Lates Tasmota  full version pre flashed

Fully compatible with official Tasmota OTA server

 

 

Specification:

 

  • Input voltage:100-240VAC 50/60Hz
  • Chipset: ESP8285 2M
  • Current:16A(Max)
  • Power rating:2200W
  • Wireless standard:IEEE802.11b/g/n,2.4GHz
  • Housing Color:Whtie
  • Operation Temperature:-20℃~+50℃
  • Plastic material:ABS+PC
  • Fire-protection rating:94-V0

 

Template:

 

{"NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18}

 

 

GPIOs:

 

GPIO# Component

GPIO0 None

GPIO1 None

GPIO2 None

GPIO3 CSE7766 Rx

GPIO4 None

GPIO5 Button1

GPIO9 None

GPIO10 None

GPIO12 Relay1

GPIO13 LedLinki

GPIO14 None

GPIO15 None

GPIO16 None

FLAG None

 

Notice:

HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.

To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.

 

Tasmota UK Plug V2

SKU: PG04V2-UK16A-TAS-1
18,40$ Precio
9,94$Precio de oferta
    bottom of page